万博体育max手机版登录|网站首页

+86-4001141985

JHG Series: Helical-Hypoid Gear Reducer

Hypoid

JHG series reducer has three sizes: 50, 63, 75. The reduction ratio of 7.5~60 adopts the two-stage transmission, and the reduction ratio of 80~300 adopts the three-stage transmission.

Features
  • The first-stage transmission adopts the hypoid gear, which has the high transmission efficiency.

    The output torque is large, and the load capacity is high.

    Smooth transmission and low noise。

    All the gears are made of high-grade alloy steel with a long lifespan.

    The external dimensions are almost the same as the JMRV series.

    The installation method is similar to the JMRV series.

    There is no difference in the diameter of the hollow output shaft compared to the standard JMRV series reducer.

    It can use all of the accessories from JMRV series。

Hypoid Gear Reducer
High Transmission Efficiency
The output torque is large, and the load capacity is high.
Rotation Direction
Installation Orientation
Features

The first-stage transmission adopts the hypoid gear, which has the high transmission efficiency.

The output torque is large, and the load capacity is high.

Smooth transmission and low noise.

All the gears are made of high-grade alloy steel with a long lifespan

The external dimensions are almost the same as the JMRV series.

The installation method is the same as JMRV series.

There is no difference in the diameter of the hollow output shaft compared to the standard JMRV series reducer.

It can use all of the accessories from JMRV series.

Configuration and Combination
Series Dimension
Please fill in the form and download: